{
	"bottom_shell_thickness": "3",
	"enable_support": "1",
	"from": "User",
	"gap_infill_speed": "60",
	"inherits": "0.20mm Standard @Creality K2 Plus 0.4 nozzle",
	"initial_layer_infill_speed": "40",
	"initial_layer_line_width": "0.6",
	"initial_layer_print_height": "0.3",
	"initial_layer_speed": "40",
	"inner_wall_line_width": "0.6",
	"inner_wall_speed": "200",
	"internal_solid_infill_line_width": "0.6",
	"internal_solid_infill_speed": "200",
	"line_width": "0.6",
	"name": "0.2мм СОЮЗСИНТЕЗ ABS PRIME",
	"outer_wall_line_width": "0.6",
	"print_extruder_id": [
		"1"
	],
	"print_extruder_variant": [
		"Direct Drive Standard"
	],
	"print_settings_id": "0.2мм СОЮЗСИНТЕЗ ABS PRIME",
	"seam_gap": "0%",
	"seam_position": "back",
	"skirt_distance": "3",
	"skirt_loops": "3",
	"slow_down_layers": "2",
	"sparse_infill_density": "30%",
	"sparse_infill_line_width": "0.6",
	"sparse_infill_pattern": "gyroid",
	"sparse_infill_speed": "200",
	"support_interface_speed": "60",
	"support_speed": "60",
	"support_type": "tree(auto)",
	"top_shell_thickness": "3",
	"top_surface_line_width": "0.6",
	"top_surface_speed": "100",
	"tree_support_branch_diameter": "3",
	"tree_support_branch_distance": "1.5",
	"version": "2.3.0.3",
	"wall_loops": "5"
}